WC-10Co4Cr Carbides powders bakeng sa mechine e akaretsang
Tlhaloso
KF-65 ke phofo ea WC-10Co4Cr ea boleng bo holimo e etselitsoeng ho fihlela litlhoko tse phahameng tsa indasteri ea peterole, ea pampiri le ea metjhini e akaretsang.Sehlahisoa sena se na le mefuta e mengata ea boholo ba 15-45 / 10-38 / 5-30 / 5-15 / 5-25μm, e etsang hore e tšoanelehe bakeng sa mefuta e mengata ea likopo.
KF-65 e fumaneha ka mefuta e 'meli e fapaneng: sinter & crush, le agglomerated & sintered.The sinter & silakanya foromo e entsoe ka sintering phofo ebe e silakanya hore e be likaroloana tse nyenyane, ha agglomerated & sintered foromo e entsoe ka agglomerating phofo ka likaroloana tse khōloanyane pele sintering.Ho tenyetseha hona ho etsa hore ho be bonolo ho kenyelletsa KF-65 ts'ebetsong ea hau ea tlhahiso le ho fihlela liphetho tse lakatsehang.
Ho feta moo, KF-65 e bapisoa le lihlahisoa tse ling tse etellang pele tse kang AMPERIT 554/556/557/558, METCO/AMDRY 5843/5163, WOKA 3903/3615/3652/3655/3665, PRAXAIR WC-436-WC-116 /WC-7311350, le PAC 1500. Sena se netefatsa hore o fumana sehlahisoa sa boleng bo phahameng ka ho fetisisa se finyellang maemo a tšoanang le a lihlahisoa tse ling tse etellang pele indastering.
E 'ngoe ea melemo e meholo ea KF-65 ke bokhoni ba eona ba ho sebetsa e le mokhoa o mong oa ho rala chromium e thata.Ena ke taba ea bohlokoa bakeng sa lik'hamphani tse batlang ho fokotsa tšusumetso ea tsona tikolohong le ho latela melaoana.Ntle le moo, KF-65 e ka fana ka pheletso e boreleli ea holim'a metsi, ea fokotsa kapa ea felisa tlhoko ea ho sebetsa ka morao.Sena se ka boloka nako le chelete ts'ebetsong ea tlhahiso, ha se ntse se fana ka liphetho tsa boleng bo holimo.
Hore na o batla ho ntlafatsa ts'ebetso ea lisebelisoa tsa hau, ho fokotsa tšusumetso ea tikoloho, kapa ho ntlafatsa boleng ba lihlahisoa tsa hau, KF-65 ke khetho e ntle haholo.Ke tharollo e tšepahalang le e theko e tlaase e ka khahlanyetsang litlhoko tsa liindasteri tse fapaneng, ho kenyeletsoa petroleum, pampiri le mechini e akaretsang.E leke kajeno 'me u iponele phapang.
Lihlahisoa tse tšoanang
| Brand | Lebitso la Sehlahiswa | AMPERIT | METCO/AMDRY | WOKA | PRAXAIR | PAC |
| KF-65 | WC-10Co4Cr | 554 | 5843 | 3903 | WC-113WC-436-1 | |
| WC-10Co4Cr | 556 / 557 / 558 | 5163 | 3651 / 36523655 / 3665 | WC-7311350 | 1500 | |
| WC-10Co4Cr | . | . | 3660FC | . | 1500 |
Tlhaloso
| Brand | Lebitso la Sehlahiswa | Boholo ba Karolo (μm) | Khemistri (wt%) | Mofuta | Boima bo bonahalang | Ho phalla | Thepa | Kopo | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Co | C | Fe | W | Cr | B | Si | Ni | ||||||||
| KF-65 | WC-10Co4Cr | 15-45, 10-38 | 9.5-10 | 5.3-5.6 | ≤0.8 | Bal. | 3.5-4.0 | Sinter & Crush | 5.5-6.5g/cm3 | ≤25 s/50g | APS, HVOF, HVAF | Tsela e 'ngoe e thata ea chromium plating;Petroleum, pampiri, mechine e akaretsang | |||
| KF-65 | WC-10Co4Cr | 15-45,10-38,5-30 | 9.5-10 | 5.3-5.6 | ≤0.8 | Bal. | 3.5-4.0 | Agglomerated le sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVOF, HVAF | Tsela e 'ngoe e thata ea chromium plating;Petroleum, pampiri, mechine e akaretsang | |||
| KF-65 | WC-10Co4Cr | 5-25, 5-15 | 9.5-10 | 5.3-5.6 | ≤0.8 | Bal. | 3.5-4.0 | Agglomerated le sintered | 3.5-4.8 g/cm3 | Ho fepa ka mokhoa o tsitsitseng ho fepa ka phofo | HVOF, HVAF | Mokhoa o mong o thata oa chromium plating; Sebaka se boreleli, mochini o fokolang kapa o sa lefelloeng oa poso; | |||
| KF-60 | WC-12Co | 15-45, 10-63 | 10.5-12 | 4.9-5.4 | ≤0.8 | Bal. | Sinter & Crush | 5.5-6.5 g/cm3 | ≤25 s/50g | APS, HVOF | Apara khanyetso，Fretting apara ho hanyetsa | ||||
| KF-60 | WC-12Co | 15-45, 10-38, 5-30 | 10.5-12 | 4.9-5.4 | ≤0.8 | Bal. | Agglomerated le sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVOF, HVAF | Apara khanyetso, Fretting apara ho hanyetsa; mechine e akaretsang | ||||
| KF-61 | WC-17Co | 15-45, 10-38 | 15.5-17 | 4.5-5.1 | ≤0.8 | Bal. | Agglomerated le sintered | 3.5-5.5 g/cm3 | ≤25 s/50g | APS, HVOF, HVAF | Wear resistance，Fretting wear resistance，Better toughness; mechine e akaretsang | ||||
| KF-62 | WC-25Co | 15-45, 10-38 | 22-26 | 4.0-4.6 | ≤0.8 | Bal. | Agglomerated and sintered, Densification | 3.0-5.5 g/cm3 | ≤25 s/50g | APS, lithunya tsa Detonation, spray e batang | Fretting wear resistance，Better toughness | ||||
| KF-66 | WC-23%CrC-7Ni | 15-45, 10-38 | 6.0-6.8 | ≤0.8 | Bal. | 16.5-20 | 5.5-7 | Agglomerated le sintered | 3.0-5.0 g/cm3 | ≤25 s/50g | APS, HVOF, HVAF | Alternative hard chromium plating; E sebelisoa bakeng sa tikoloho e tlase ea acid / alkaline ho 200 ℃;Anti oxidation le ho roala ho hanyetsa ho 750 ℃ | |||
| KF-66 | 43WC-43%CrC-14Ni | 15-45,10-38 | 7.8-8.4 | ≤0.8 | Bal. | 35-38 | 12-14 | Agglomerated le sintered | 2.0-4.0 g/cm3 | ≤35 s/50g | APS, HVOF, HVAF | Alternative hard chromium plating E sebedisetsoa tikoloho e tlase ea acid / alkali ho 200 ℃. | |||
| KF-63 | WC-10Ni | 15-45,10-38 | 4.5-5.2 | ≤0.1 | Bal. | 8.5-10.5 | Agglomerated le sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVF, HVAF | Sekoaelo se sa sebetsaneng le ho roala ha makenete.Ho hanyetsa kutu ho betere | ||||
| KF-70 | Cr3C2-25NiCr | 15-45, 20-53 | 9-11 | ≤1 | Bal. | 18-21.5 | Agglomerated le sintered | ≥2.3 g/cm3 | Ho fepa ka mokhoa o tsitsitseng ho fepa ka phofo | APS, HVOF | Anti oxidation le ho roala ho hanyetsa ho 815 ℃ | ||||
| KF-69 | Cr3C2-20NiCr | 15-45, 20-53 | 9-11 | ≤1 | Bal. | 15-17.5 | Agglomerated le sintered | ≥2.3 g/cm3 | Ho fepa ka mokhoa o tsitsitseng ho fepa ka phofo | APS, HVOF | Anti oxidation le ho roala ho hanyetsa ho 815 ℃ | ||||
| KF-71 | Cr3C2-30NiCr | 15-45, 20-53 | 9-11 | ≤1 | Bal. | 15-17.5 | Agglomerated le sintered | ≥2.3 g/cm3 | Ho fepa ka mokhoa o tsitsitseng ho fepa ka phofo | APS, HVOF | Anti oxidation le ho roala ho hanyetsa ho 815 ℃.Matla a betere | ||||
| KF-60 | WC-12Co (Khabone e Tlase) | 15-45, 20-53 | 10.5-12 | 4.0-4.4 | ≤0.8 | Bal. | Agglomerated le sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | HVOF, HVAF | E sebelisoa bakeng sa lirolo tsa ho hlapa tsa Zn ka Methapo e Tsoelang Pele ea ho Galatsa | ||||
| KF-68 | WC-30WB-10Co | 15-45,20-53,10-38 | 9-11 | 3.5-3.9 | Bal. | 1.4-1.7 | Agglomerated le sintered | 3.0-4.9 g/cm3 | ≤30 s/50g | HVOF, HVAF | E sebelisoa bakeng sa lirolo tsa ho hlapa tsa Zn ka Methapo e Tsoelang Pele ea ho Galatsa | ||||
| KF-68 | WC-30WB-5Co5Cr | 15-45,20-53,10-38 | 4-6 | 3.5-3.9 | Bal. | 4-6 | 1.4-1.7 | Agglomerated le sintered | 3.0-4.9 g/cm3 | ≤30 s/50g | HVOF, HVAF | E sebelisoa bakeng sa lirolo tsa ho hlapa tsa Zn ka Methapo e Tsoelang Pele ea ho Galatsa | |||
| KF-300E | 35%WC-NiCrBSi | 15-53,45-104 | 2.5-3.2 | 1.0-2.6 | 32-35 | 7.5-9 | 1.5-1.9 | 2.0-2.7 | Bal. | WC le NiCrBSi e etsang motsoako oa motsoako | 4.0-4.9 g/cm3 | ≤16 s/50g | HVOF, PS | Alternative Blended Type WC+Ni60 | |
| KF-300F | 50%WC-NiCrBSi | 15-53,45-104 | 3.2-4.3 | 0.8-2.0 | 45-48 | 5.8-7.2 | 1.0-1.7 | 1.5-2.4 | Bal. | WC le NiCrBSi e etsang motsoako oa motsoako | 5.0-7 g/cm3 | ≤16 s/50g | HVOF, PS | Alternative Blended Type WC+Ni60 | |
